Scenarios determine the process; the process determines the model.

Five industries require different molding dimensions, surface finishes, and cycle times. Below is a scenario-based guide to recommended machine types, materials, and post-processing methods to help you align with your project needs.

Lightweight Structural Components and Complex Flow Path Validation
AerospaceScenario Illustration

01 · Lightweight Structural Components and Complex Flow Channel Validation

Aerospace

During structural validation, use large-format molding to rapidly produce near-final prototypes, shortening wind tunnel and assembly verification cycles. The SLA800 supports intricate structures and transparent parts, while the BL10 series handles large enclosures and tooling fixtures.

  • Integrated molding of complex flow channels and thin-walled structures
  • Lightweight verification documents for rapid iteration
  • Substitute some machining operations during the prototyping phase
Recommended ModelsSLA800BL10-D

Related Research

Current Status of Arc Additive Manufacturing Processes for Titanium Alloys in Aviation

Journal of Materials Engineering and Performance, 2022

Read original
Consult based on this scenario
Dental impressions, dentures, and surgical guide models
Health & DentalScenario Illustration

02 · Dental Impressions, Dentures, and Surgical Guides

Health & Dental

The HF series delivers high-resolution projection printing for dental models and denture bases, boosting single-shift output with optimized batch layouts. Planned models facilitate preoperative communication and treatment plan confirmation, reducing time costs from repeated fabrication.

  • Batch layout for full arch dental models
  • High-resolution detail restoration
  • Rapid delivery of preoperative planning models
Recommended ModelsHF-DL1HF-L3Pro

Related Research

Comparison of accuracy and precision across 12 dental 3D printers

BDJ Open (Nature portfolio), 2022

Read original
Consult based on this scenario
Interior and exterior trim samples, bumpers, and tooling fixtures
Automotive & TransportationScenario Illustration

03 · Interior and exterior trim samples, bumpers, and tooling fixtures

Automotive & Transportation

1000mm-level molding enables one-piece forming of large components like bumpers and instrument panel skeletons, reducing the need for拼接 parts and seam finishing. PETG, ABS, PP, and other engineering materials cover both appearance validation and assembly validation requirements.

  • Bumper and interior trim components, molded as single pieces
  • Parallel assembly validation and appearance review
  • Quick Change Tooling Fixtures
Recommended ModelsBL10-A / BL10-BBL10-C

Related Research

A Review of Aluminum Alloy Arc Additive Manufacturing Applications in Aerospace and Automotive Industries

Materials Science and Technology, 2022

Read original
Consult based on this scenario
Large-scale Props, Sculptures, and Decorative Installations
Merchandise and AdvertisingScenario Illustration

04 · Large-format props, sculptures, and decorative installations

Merchandise and Advertising

Advertising and display projects often have tight deadlines and large dimensions. The BL10 series can complete full-piece output within days, supporting silk, gradient, and multi-color filaments for surface effects. Post-processing enables painting and拼接 (assembly).

  • One-piece construction to minimize seams
  • Color and Gradient Material Rendering
  • Surface Coating and Post-Processing
Recommended ModelsBL10-A / BL10-BBL10-C

Related Research

Digital Twin for Large-Format Additive Manufacturing: Short-Carbon-Fiber ABS Pellet Extrusion

Proceedings of the Institution of Mechanical Engineers, Part L: 2023

Read original
Consult based on this scenario
Jigs and fixtures, small-batch parts, and master molds
Precision ManufacturingScenario Illustration

05 · Jigs and fixtures, small-batch parts, and master molds

Precision Manufacturing

For low-volume, high-mix parts, 3D printing bypasses tooling for direct delivery. SLA800 and HF series ensure fine details and fit precision, while BL10-D meets structural and fixture strength requirements.

  • Low-volume delivery without tooling
  • Coordinate face and detail precision control
  • Rapid Iteration of Fixtures and Gauges
Recommended ModelsSLA800BL10-D

Related Research

3D Printing on the International Space Station: In-Orbit Fabrication of Plastics and Metals

NASA · ISS Research

Read original
Consult based on this scenario

Literature & Research

Process boundaries

The following citations from publicly published papers and institutional studies illustrate the applicable boundaries of various processes and their technological evolution directions. Literature conclusions are based on original texts and do not constitute commitments to specific projects.

Large-format extrusion2023

Digital Twin for Large-Format Additive Manufacturing: Short Carbon Fiber ABS Pellet Extrusion

Using wind turbine blade molds as test pieces, ABS pellets containing 20% short carbon fibers were extruded and printed. The study links material microstructure and homogenization models to final part deformation, identifying warpage and residual stress as primary sources of deformation in large-format parts. Controlling these requires both accurate material modeling and process simulation.

Proceedings of the Institution of Mechanical Engineers, Part L: 2023

Corresponding scenario:Merchandise and AdvertisingRead more
Dental Light-Curing2022

Comparing accuracy and precision of 12 dental 3D printers

Comparing 12 commonly used clinical devices under the same test block and uniform 100 μm layer thickness, with deviations measured by a laboratory scanner. Results show stable accuracy differences across price tiers, attributed to optical resolution, build orientation, and process settings.

BDJ Open (Nature portfolio), 2022

Corresponding scenario:Health & DentalRead more
Metal Arc Additive Manufacturing2022

A Review of Aluminum Alloy Arc Additive Manufacturing Applications in Aerospace and Automotive Industries

Summary of research on aluminum alloy wire arc additive manufacturing for aerospace and automotive parts: The process is well-suited for medium-to-large structural components, offering better material utilization and lead times than conventional milling. However, deformation, porosity, and microstructural anisotropy induced by thermal input must be addressed through process parameter optimization and post-processing.

Materials Science and Technology, 2022

Corresponding scenario:Automotive & TransportationRead more
Metal Arc Additive Manufacturing2022

Current Status of Arc Additive Manufacturing Processes for Titanium Alloys in Aviation

Review progress on titanium alloy arc additive manufacturing for airframe structures and engine components, highlighting that reducing the "buy-to-fly" ratio is the primary driver. Key engineering challenges to address before batch production include porosity, delamination, residual stress, crack propagation, and oxidation.

Journal of Materials Engineering and Performance, 2022

Corresponding scenario:AerospaceRead more
Construction Printing2018

Concrete Extrusion 3D Printing: A Research Roadmap

Discuss the rheological and hardening properties of fresh cementitious materials alongside forming geometry within a unified framework. Organize process constraints by component fabrication and in-situ wall applications to establish a research problem matrix for future studies.

Cement and Concrete Research, 2018

Read more
In-orbit manufacturing2014—

3D Printing on the International Space Station: In-Orbit Fabrication of Plastics and Metals

In 2014, the first plastic extrusion printer was launched on orbit and successfully printed over ten tools and parts, including wrenches. Subsequent experiments involved stainless steel metal printing. Comparisons between space-fabricated components and ground-based counterparts revealed that microgravity had no significant impact on the extrusion forming process.

NASA · ISS Research

Corresponding scenario:Precision ManufacturingRead more

Read More:ISO/ASTM 52900:2021Additive Manufacturing: Terminology and ClassificationOverview of Additive Manufacturing Materials and Methods (Composite Structures, 2021)

Can't find the right scenario?

Tell us the part's application, dimensions, and operating environment. Our engineers will determine whether FDM or SLA is more suitable.

Get Configuration Options
WhatsAppGet Configuration Options